Comments on: bringing up i2c on the raspberry pi with arch linux/2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/various and sundry notionsWed, 24 Aug 2016 00:53:23 +0000hourly1http://wordpress.com/By: whbeebe/2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/comment-page-1/#comment-827Wed, 24 Aug 2016 00:53:23 +0000/?p=366#comment-827>> So sad you have leave Arch.

I have since gone back to Arch when I found other limitations in the alternatives. I’m fully back with Arch.

>> And to take sudo permissions away:

I figured that out on my own as well: /2016/03/31/running-rpi3-applications-that-use-gpio-without-being-root/

Thanks for coming by and providing additional links and information.

Like

]]>By: pepecuis/2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/comment-page-1/#comment-826Tue, 23 Aug 2016 22:36:58 +0000/?p=366#comment-826So sad you have leave Arch.
I put my BMP180 to work following some sources:
http://raspberrypi-aa.github.io/session3/i2c-temp-pressure.html
And to take sudo permissions away:
http://raspberrypi.stackexchange.com/questions/4468/i2c-group-on-arch
Final rules is one line: KERNEL==”i2c-[0-9]*”, GROUP=”i2c”, MODE=”0666″
Add yourself to i2c group.
It works nicely!!

Liked by 1 person

]]>By: raspberry pi 3 – the adventure continues | Arcane Science Lab/2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/comment-page-1/#comment-631Wed, 09 Mar 2016 06:49:27 +0000/?p=366#comment-631[…] out) through some paces, starting with bringing up the i2c interface. I’d done this early on with the original Raspberry Pi a little over two years ago using the Arch Linux distribution. I followed those directions but with Raspbian as the target […]

Like

]]>By: whbeebe/2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/comment-page-1/#comment-244Thu, 13 Nov 2014 00:58:01 +0000/?p=366#comment-244In reply to kamil.

Thank you. Corrected.

Like

]]>By: kamil/2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/comment-page-1/#comment-243Wed, 12 Nov 2014 22:54:10 +0000/?p=366#comment-243There is typo in module name. It should be lm_sensors rather than lm-sensors.

Like

]]>By: bringing up i2c on the raspberry pi with arch l.../2014/02/02/bringing-up-i2c-on-the-raspberry-pi-with-arch-linux/comment-page-1/#comment-54Tue, 04 Feb 2014 20:29:29 +0000/?p=366#comment-54[…] I finally figure out why i2c wasn't working on my R-Pi. Not all the Arch Linux packages had been installed, and I needed to tweak yet another configuration file. Here's the steps I followed to get …  […]

Like

]]>